Remove front bumper cover

NOTE: RISK OF DAMAGE
Mechanical effects .
Paint damage .

Mask those working areas at risk with yellow plastic adhesive tape.
Remove and install heavy or bulky components with the aid of another person/other persons.

NOTE: TECHNICAL INFORMATION
Notes for the gap dimensions of the body form the basis of this REP and it is mandatory to observe them.
For additional information see: BODY GAP DIMENSIONS (COOPER 4-DOOR HATCHBACK, 2020-2023)

Preliminary work

Refer to REMOVING THE FRONT LEFT AND RIGHT WHEEL ARCH TRIM .

Loosen screws (1).

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Perform the steps on the right and left side.

Loosen screws (1).

Courtesy of BMW OF NORTH AMERICA, INC.
Loosen screws (1).
Pull the bumper cover slightly forwards with the help of a support person.
Unlock and disconnect all plug connections depending on equipment specification.
Remove the bumper cover to the front with the help of a support person.

Courtesy of BMW OF NORTH AMERICA, INC.