Installing the front controller

• Position front controller (2)  on the center console trim (4)  and install into the clamp (3)  .
• Tighten down screws (1)  .
  TIGHTENING TORQUES SPECIFICATION
  
  

  Controller to center console trim
  Oval-head screw for thermoplastic	tightening torque	1.8 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE CENTER CONSOLE TRIM .
• Refer to CONNECTING BATTERY GROUND LEAD .
• Refer to ACTIVATING HIGH-VOLTAGE SYSTEM .
• Refer to INSTALLING THE COVER OF THE HIGH-VOLTAGE SAFETY PLUG .
• Refer to ENCODE/PROGRAM CONTROL UNIT(S) .