Connect battery ground lead

• Connect the connector (3) to the IBS and lock it audibly.
• Mount battery ground lead (2) on the negative battery terminal.
• Tighten nut (1).
  TIGHTENING TORQUES SPECIFICATION
  
  

  Battery terminal clamp on battery terminal
  M6	Tightening torque	5 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Feed in cowl cover (3).
• Turn locks (2) clockwise up to stop.
• Tighten down cap nuts (1).
  TIGHTENING TORQUES SPECIFICATION
  
  

  Fairing panel cover
  		2.8 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Mount gasket (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to ACTIVATING HIGH-VOLTAGE SYSTEM .
• Refer to INSTALLING THE COVER OF THE HIGH-VOLTAGE SAFETY PLUG .