Removing and installing/replacing 12-V power socket (Cooper 4-door hatchback and 2-door hatchback, 2020-2023)

Special tools required: 

• 61 0 250 

Preliminary work needed: 

• REMOVING USB AUDIO INTERFACE CONNECTING SOCKET .
• Remove RIGHT TRUNK WHEEL ARCH PANEL .

Front center console: 

Disconnect the connector from the socket through the opening.

Remove the socket with a special tool. See last operation.

Courtesy of BMW OF NORTH AMERICA, INC.

Trunk, right: 

Remove the socket with a special tool. See last operation.

Courtesy of BMW OF NORTH AMERICA, INC.

Pull out 12-V power socket from housing with special tool 61 0 250  until connector is at bottom of light ring.

For further information, see applicable BMW Service Information SI 01 08 09 (531) .

Courtesy of BMW OF NORTH AMERICA, INC.