61 71 100 Removing and installing/replacing windscreen washer pump

WARNING: This page is about a different variant/trim than selected.

Before replacing the windscreen washer pump, check the washer fluid reservoir for dirt contamination and clean if necessary!

Necessary preliminary tasks:

Removal:

NOTE: Catch any escaping washer fluid if necessary.

Unlock and disconnect the connector (1).

Unlock hose pipes and disconnect from windscreen washer pump (2).

Pull windscreen washer pump (2) upwards out of washer fluid reservoir for window washer system.

If necessary, remove sealing ring with strainer (3) from washer fluid reservoir and windscreen washer pump (2).

Fig 1: Locating Windscreen Washer Pump

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

NOTE: Replace sealing ring with strainer (3).
Coat sealing ring (3) with lubricant.
Ensure hose pipes are laid without kinks.

Feed in windscreen washer pump (2) into washer fluid reservoir for window washer system.

Connect hose pipes to windscreen washer pump (2).

Connect the plug (1).

Fig 2: Locating Windscreen Washer Pump

Courtesy of BMW OF NORTH AMERICA, INC.

If necessary, top up washer fluid reservoir.