41 33 721 Replacing the right headlight fixture

WARNING: This page is about a different variant/trim than selected.

Necessary preliminary work:

REMOVAL:

Release wiring harness at attachment point (1).

Release screws (2) to (5) and remove headlight fixture (6).

Fig 1: Wiring Harness Attachment Points, Screws, And Headlight Fixture

Courtesy of BMW OF NORTH AMERICA, INC.

INSTALLATION:

Install headlight fixture (6) and tighten screws (2) to (5).

Screws (5): Tightening torque 41 33 3AZ .

Screw (4): Tightening torque 41 35 1AZ .

Screw (3): Tightening torque 51 11 1AZ .

Fasten wiring harness in area (1).

Fig 2: Wiring Harness Attachment Points, Screws, And Headlight Fixture

Courtesy of BMW OF NORTH AMERICA, INC.