51 24 105 Removing and installing/replacing rear lid lock

Necessary preliminary work: 

• Remove TAILGATE TRIM PANEL 

REMOVAL: 

Release screws (1).

Unlock associated plug connection and disconnect.

Remove tailgate lock (2).

Fig 1: Tailgate Lock And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

INSTALLATION: 

Connect associated plug connections.

Position tailgate lock (2).

Tighten down screws (1).

Tightening torque 51 24 1AZ .

Fig 2: Tailgate Lock And Screws

Courtesy of BMW OF NORTH AMERICA, INC.