51 49 000 Removing and installing or replacing trim for rear lid

WARNING: This page is about a different variant/trim than selected.

REMOVAL:

Remove warning triangle.

Release screws (1).

Remove warning triangle holder.

Release trim panel (4) from clips (2 and 3) and remove.

Fig 1: Trim Panel, Clips And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

INSTALLATION:

NOTE: Replace faulty clips (2 and 3).

Position and clip in trim panel (4) with clips (2 and 3).

Secure warning triangle holder with screws (1).

Install warning triangle.

Fig 2: Trim Panel, Clips And Screws

Courtesy of BMW OF NORTH AMERICA, INC.