51 41 000 Removing and installing (replacing) front left or right door trim panel

WARNING: This page is about a different variant/trim than selected.

Special tools required:

Necessary preliminary tasks:

Removal:

Fig 1: Cover And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Remove cover (1).

Unfasten screws (2).

Release screws (1).

Fig 2: Door Trim Panel Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Release door trim panel (1) from clips (2) and clamps (3) using special tool 00 9 317 .

Fig 3: Door Trim Panel, Clips And Clamps

Courtesy of BMW OF NORTH AMERICA, INC.

Detach cable (1) on door lock.

Unlock and disconnect all associated plug connections.

Release associated cable clips.

Remove door trim panel.

Fig 4: Detaching Cable On Door Lock

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Make sure cable (1) is in correct position in holder (2).

Fig 5: Cable And Holder

Courtesy of BMW OF NORTH AMERICA, INC.

Attach cable (1) on door lock.

Connect all associated plug connections.

Fig 6: Detaching Cable On Door Lock

Courtesy of BMW OF NORTH AMERICA, INC.

Engage door trim panel (1) in clips (2) and clamps (3).

If necessary, replace faulty clips (2) and clamps (3).

Fig 7: Door Trim Panel, Clips And Clamps

Courtesy of BMW OF NORTH AMERICA, INC.

Tighten down screws (1).

Fig 8: Door Trim Panel Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Engage cover (1).

Tighten down screws (2).

Fig 9: Cover And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

With door open, check function of door opener and outside door handle.