LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2019 >> Cooper S, 4D Hatchback, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Body Equipment - Repair (F56) -- Cooper, F56) >> Exterior Trim / Covers >> 51 13 402 Removing and installing/replacing the tailgate handle strip

51 13 402 Removing and installing/replacing the tailgate handle strip

WARNING: This page is about a different variant/trim than selected.

Necessary preliminary tasks: 

Removal: 

Release screws (1).

Fig 1: Locating Screws
G11649070Courtesy of BMW OF NORTH AMERICA, INC.

Pull off the tailgate handle strip (1) from the tailgate, unlock and disconnect the associated plug connections.

Remove the tailgate handle strip (1).

Fig 2: Removing Tailgate Handle Strip
G11649071Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Replacement: 

Position the tailgate handle strip.

Connect plug connections.

Tighten down screws (1).

Fig 3: Locating Screws
G11649070Courtesy of BMW OF NORTH AMERICA, INC.