51 11 780 Replacing the front deformation element on the bottom left

WARNING: This page is about a different variant/trim than selected.

Necessary preliminary tasks:

REMOVAL:

Only Cooper S:

Release expanding rivet (1).

Release screw (2).

Feed out air duct (3) from guide (4) and remove.

Fig 1: Expanding Rivet, Air Duct, Guide And Screw

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1 to 3).

Remove deformation element (4).

Fig 2: Deformation Element And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

INSTALLATION:

Insert deformation element (4).

Tighten screws (1 to 3).

Fig 3: Deformation Element And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Only Cooper S:

Feed in air duct (3) with guide (4) into holder.

Secure air duct (3) with screw (2) and expanding rivet (1).

Fig 4: Expanding Rivet, Air Duct, Guide And Screw

Courtesy of BMW OF NORTH AMERICA, INC.