Replacing sealing cap (GS6-58/59 BG/DG) (Cooper Clubman models with FWD)

Special tools required:

23 0 120
23 0 370
0 002 877

Preliminary work needed:

Remove front left WHEEL .

Removal:

IMPORTANT: Risk of damage:
Damage to the transmission housing will result in oil leaks!

Knock in sealing cap (1) on the transmission with a slotted screwdriver and lever out.

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Manually insert sealing cap (1) into transmission opening.

Courtesy of BMW OF NORTH AMERICA, INC.

Drive sealing cap (1) flush to the stop with special tool 0 002 877.

Courtesy of BMW OF NORTH AMERICA, INC.

Required follow-up work:

Install front left WHEEL .
Check TRANSMISSION OIL LEVEL .

IMPORTANT: After completion of work, check TRANSMISSION OIL LEVEL .
The vehicle must be parked on a level surface in the workshop to check the transmission oil level.
Use only the approved TRANSMISSION OIL and fill to the appropriate level.
Failure to comply with this instruction above will result in serious damage to the transmission.