Replacing front ride height sensor (Cooper)

Preliminary work needed: 

• Turn steering wheel to right.

Removal: 

Unlock connector (1) and disconnect.

Unscrew nut (3).

Detach the jointed rod on the lever of the sensor. Release screw (2).

Remove ride height sensor (4).

Courtesy of BMW OF NORTH AMERICA, INC.

Unscrew the screws (1).

Remove holder (2) from ride height sensor.

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Courtesy of BMW OF NORTH AMERICA, INC.

Align holder (2) to ride height sensor. Tighten down screws (1).

Tightening torque 37 14 1AZ .

Courtesy of BMW OF NORTH AMERICA, INC.

Align ride height sensor (4) with holder on front axle support.

Tighten screw (2).

Tightening torque 37 14 2AZ .

Insert jointed rod on ride height sensor.

Tighten nut (3).

Tightening torque 37 14 4AZ .

Insert connector (1).

Required follow-up work: 

• Check HEADLIGHT ADJUSTMENT , correct if necessary.