Adjusting headlights (Cooper)

Carry out headlight adjustment at adjustment screws (1) and (2).

Adjustment screw (1) - priority for vertical adjustment

Adjustment screw (2) - priority for lateral adjustment

A definite allocation of adjustment screws is not possible.

1. Carry out height adjustment at adjustment screw (1)

   Courtesy of BMW OF NORTH AMERICA, INC.

   US version only: 

   Only set the lateral adjustment if the safety plug in the LATERAL ADJUSTMENT SCREW  is missing or damaged.

   If necessary, remove damaged plugs using a suitable tool.

2. Carry out lateral adjustment at adjustment screw (2)

After headlight adjustment: 

Perform reference run. For this purpose, switch off and on the headlights. Check again headlight adjustment.

US version only: 

If the lateral adjustment has been checked and corrected, push new plug into the ADJUSTMENT SCREW  for the lateral adjustment without damaging it  .