Removing and installing/replacing sensor for automatic air recirculation control

Preliminary work needed: 

• Remove COWL PANEL .

Removal: 

Disengage sensor (1) in arrow direction.

Courtesy of BMW OF NORTH AMERICA, INC.

Unfasten plug connection (1) and disconnect.

Remove sensor (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Join plug connection (1) to sensor (2) and lock.

Courtesy of BMW OF NORTH AMERICA, INC.

Shift sensor (1) in arrow direction shift until sensor (1) is locked.

Courtesy of BMW OF NORTH AMERICA, INC.

Required reworking: 

• Install COWL PANEL .