51 49 003 Removing and installing/replacing cover for rear window frame on left or right

Preliminary work needed: 

• Remove UPPER REAR WINDOW FRAME COVER 
• Remove TRIM FOR REAR LID AT BOTTOM 

REMOVAL: 

Detach retaining cord (1) for rear storage shelf and release screw (2).

Fig 1: Rear Parcel Shelf Retaining Rod And Screw

Courtesy of BMW OF NORTH AMERICA, INC.

Release trim panel (1) from clip (2) and remove.

Installation note: 

Replace the faulty clip (2).

Fig 2: Releasing Trim Panel From Clip

Courtesy of BMW OF NORTH AMERICA, INC.

INSTALLATION: 

Position trim panel (1).

If required, replace clip (2).

Engage clip (2).

Fig 3: Positioning Trim Panel

Courtesy of BMW OF NORTH AMERICA, INC.

Tighten screw (2) and attach retaining cord (1) for rear storage shelf.

Fig 4: Rear Parcel Shelf Retaining Rod And Screw

Courtesy of BMW OF NORTH AMERICA, INC.

Required reworking: 

• Install TOP REAR WINDOW FRAME COVER 
• Install BOTTOM TAILGATE TRIM PANEL