51 48 001 Removing and installing/replacing insulation lining on engine hood/hood

WARNING: This page is about a different car, the 2019 MINI Cooper, 2018 MINI Cooper, 2017 MINI Cooper, 2016 MINI Cooper, and 2015 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Work explained using the F56 MINI Cooper ECE as an example, details may deviate in other models.

Removal:

Remove the clips from the damping layer.

Remove damping layer.

Fig 1: Locating Damping Layer Clips

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Parts note:

Replace faulty clips.

Position the damping layer and secure using clips.

Fig 2: Locating Damping Layer Clips

Courtesy of BMW OF NORTH AMERICA, INC.