51 21 170 Removing and installing/replacing the outside door handle on the left or right front door

WARNING: This page is about a different car, the 2019 MINI Cooper, 2018 MINI Cooper, 2017 MINI Cooper, 2016 MINI Cooper, and 2015 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Removal:

Lever out cover (1) and release screw underneath.

NOTE: Undo the screw only until the outer door handle is detached.

Fig 1: Releasing Screw

G11649188

Courtesy of BMW OF NORTH AMERICA, INC.

Pull out outer door handle (1) and feed out retaining plate (2).

Fig 2: Pulling Out Outer Door Handle

G11649189

Courtesy of BMW OF NORTH AMERICA, INC.

Pull outer door handle (1) towards the rear and feed out.

If necessary, unlock associated plug connections and disconnect.

Remove outer door handle.

Fig 3: Removing Outer Door Handle

G11649190

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Connect plug connections.

Feed in outer door handle into front opening.

Fig 4: Feeding Outer Door Handle Into Front Opening

G11649191

Courtesy of BMW OF NORTH AMERICA, INC.

Use string (2) to pull lock actuation (1) outwards and hold in position.

Install outer door handle and insert correctly into lock actuator (1).

Pull out string (2).

Fig 5: Pulling Out String

G11649192

Courtesy of BMW OF NORTH AMERICA, INC.

Pull out outer door handle (1) slightly and feed in retaining plate (2).

Ensure gasket (3) is seated correctly.

Fig 6: Pulling Out Outer Door Handle

G11649193

Courtesy of BMW OF NORTH AMERICA, INC.

Tighten bolt and mount cover (1).

Tightening torque 51 21 5AZ .

Fig 7: Tightening Mount Cover Bolt

G11649194

Courtesy of BMW OF NORTH AMERICA, INC.

Carry out functional check with door open!