51 47 491 Removing refitting/replacing rear engine undercover

WARNING: This page is about a different car, the 2019 MINI Cooper, 2018 MINI Cooper, 2017 MINI Cooper, 2016 MINI Cooper, and 2015 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Picture for example purposes. Some parts may differ in certain details.

Removal:

Release screws (1 and 2).

Remove underbody protection (3).

Fig 1: Removing Underbody Protection Screws (1 And 2)

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Install underbody protection (3).

Tighten down screws (1 and 2).

Tightening torque 51 71 5AZ

Fig 2: Removing Underbody Protection Screws (1 And 2)

Courtesy of BMW OF NORTH AMERICA, INC.