61 33 060 Removing and installing/replacing both fanfare horns

WARNING: This page is about a different car, the 2019 MINI Cooper, 2018 MINI Cooper, 2017 MINI Cooper, 2016 MINI Cooper, and 2015 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Preliminary work needed:

Remove FRONT BUMPER COVER

Removal:

Unlock and disconnect connector (1) on cable clip.

Fig 1: Disconnecting Connector On Cable Clip

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1) and feed out holder with fanfare horns (2) downwards.

Fig 2: Releasing Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Feed in holder with fanfare horns (2) from below and tighten with screws (1).

Tightening torque: 6 Nm.

Fig 3: Releasing Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Connect connector (1) to cable clip.

Fig 4: Disconnecting Connector On Cable Clip

Courtesy of BMW OF NORTH AMERICA, INC.