61 35 975 Removing and installing/replacing bumper antenna for Comfort Access

WARNING: This page is about a different car, the 2019 MINI Cooper, 2018 MINI Cooper, 2017 MINI Cooper, 2016 MINI Cooper, and 2015 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Preliminary work needed:

Remove REAR BUMPER TRIM

Removal:

Disconnect connector (1).

Release detent.

Pull bumper antenna (2) out of holder (3).

Fig 1: Pulling Bumper Antenna

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Connect the connector (1).

Join bumper antenna (2) in holder (3).

Installation note:

Ensure bumper antenna (2) engages correctly on holder (3).

Fig 2: Pulling Bumper Antenna

Courtesy of BMW OF NORTH AMERICA, INC.