Overview of additional work for the removal and installation or replacement of electronic components in the body area/windshield
WARNING: This page is about a different car, the 2019 MINI Cooper, 2018 MINI Cooper, 2017 MINI Cooper, 2016 MINI Cooper, and 2015 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
| Component | Removal and installation Calibration/Initialization required (diagnostic system must be connected) | Removal and installation Use of the Special tool necessary | Replacement Programming/coding Calibration/Initialization required (diagnostic system must be connected) |
Replacement Use of the Special tool necessary |
Remarks |
|---|---|---|---|---|---|
| Front section: (including bumper cover) |
|||||
| PARK DISTANCE CONTROL ULTRASONIC SENSOR | No | No | No | No | |
| Parking Maneuvering Assistant ultrasonic sensor | No | No | No | No | |
| Active pedestrian protection sensor | No | No | No | No | Must be replaced after the active pedestrian protection has been activated! Impact absorber must also be replaced! |
| ACTIVE PEDESTRIAN PROTECTION ACTUATOR | No | No | No | No | Must be replaced after the active pedestrian protection has been activated! |
| Rear area: (including bumper cover): |
|||||
| REAR VIEW CAMERA | No | No | Yes | No | |
| PARK DISTANCE CONTROL ULTRASONIC SENSOR | No | No | No | No | |
| Windshield: | |||||
| KAFAS CAMERA | no* | No | no* | No | *Necessary after replacement of the windshield |
| RAIN SENSOR |