11 33 062 Replacing all hydraulic valve clearance compensating elements (B36A/B38A)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2019 MINI Cooper, 2018 MINI Cooper, 2017 MINI Cooper, 2016 MINI Cooper, and 2015 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

11 4 480

When reused, the hydraulic valve clearance compensating elements must be fitted at the same position.

Necessary preliminary tasks:

Remove ALL ROCKER ARMS

Remove all hydraulic valve clearance compensating elements (1) in direction of arrow.

NOTE: If hydraulic valve clearance compensating elements (1) are reused, they must be placed together with rocker arms in neat order in special tool 11 4 480 .

Fig 1: Removing Hydraulic Valve Clearance Compensating Elements

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Install all hydraulic valve clearance compensating elements (1).

Fig 2: Installing Hydraulic Valve Clearance Compensating Elements

Courtesy of BMW OF NORTH AMERICA, INC.

Required follow-up work:

Check function of DME; if necessary, readjust uniform mixture distribution.