11 28 020 Replacing tensioning device for alternator drive belt (B36A/B38A)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2019 MINI Cooper, 2018 MINI Cooper, 2017 MINI Cooper, 2016 MINI Cooper, and 2015 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Tensioning device is subject to spring bias (danger of injury!)
.
Necessary preliminary tasks:
- Remove DRIVE BELT
Removal:
Release screws (1) from belt tensioner (2).
Remove belt tensioner (2).
Installation:
Install belt tensioner (2).
Tighten down screws (1).
Tightening torque: 11 28 1AZ .