65 12 071 Removing and installing or replacing amplifier (standard)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2019 MINI Cooper, 2018 MINI Cooper, 2017 MINI Cooper, 2016 MINI Cooper, and 2015 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT:

Read and comply with notes on PROTECTION AGAINST ELECTROSTATIC DISCHARGE (ESD PROTECTION) .

Comply with notes on HANDLING OPTICAL FIBRES .

Necessary preliminary tasks:

Disconnect BATTERY EARTH LEAD
Remove LUGGAGE COMPARTMENT WHEEL ARCH PANEL ON LEFT .

REMOVAL:

Release screw (1).

Unfasten plug connection (2) and disconnect.

Remove amplifier (3) in direction of arrow.

Fig 1: Removing Amplifier

G11650266

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

In Harman Kardon version, perform VEHICLE PROGRAMMING AND ENCODING .

INSTALLATION:

NOTE: Lugs (1) must be correctly slid into guide (2).
Check that amplifier (3) is securely seated.

Fig 2: Locating Lugs And Guide For Amplifier

G04797335

Courtesy of BMW OF NORTH AMERICA, INC.

Install amplifier (3) in direction of arrow.

Tighten screw (1).

Join and lock plug connection (2).

Fig 3: Installing Amplifier In Position

G11650268

Courtesy of BMW OF NORTH AMERICA, INC.