65 77 720 Removing and installing (replacing) left/right B-pillar sensor

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2019 MINI Cooper, 2018 MINI Cooper, 2017 MINI Cooper, 2016 MINI Cooper, and 2015 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

WARNING: Observe all applicable SAFETY INFORMATION pertaining to airbag.

Incorrect handling can activate airbag and cause injury.

IMPORTANT: Read and comply with notes on PROTECTION AGAINST ELECTROSTATIC DISCHARGE (ESD PROTECTION) .

Necessary preliminary tasks:

Disconnect BATTERY EARTH LEAD and cover
Remove SIDE TRIM PANEL

REMOVAL:

Unfasten plug connection (1) and disconnect.

Release screw (2).

Remove sensor (3).

Fig 1: Locating Screws For Removing Left B-Pillar Sensor

Courtesy of BMW OF NORTH AMERICA, INC.

INSTALLATION:

Position sensor (3).

Tighten screw (2).

Tightening torque 65 77 3AZ .

Join and lock plug connection (1).

Fig 2: Locating Left B-Pillar Sensor Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.