62 30 530 Replace combination disc (Head-Up Display)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2019 MINI Cooper, 2018 MINI Cooper, 2017 MINI Cooper, 2016 MINI Cooper, and 2015 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
Special tools required:
IMPORTANT:
Comply with notes on PROTECTION AGAINST ELECTROSTATIC DAMAGE (ESD PROTECTION)
.
IMPORTANT:
Risk of damage!
Do not scratch glass pane of head-up display.
Necessary preliminary work:
- Remove TRIM FOR HEAD UP DISPLAY
- Connect diagnosis system
Removal:
Fold out service flap (1) in direction of arrow.
NOTE:
Undo the service flap (1) at the side using special tool 64 1 020
.
Open the lock (1) in direction of arrow on both sides with special tool 00 9 030 .
Bring the combination disc (1) into the service position (B) using the diagnosis system.
Feed the combination disc (1) out of the Head Up Display (2) in direction of arrow.
Installation:
Feed the combination disc (1) into the Head Up Display (2) in direction of arrow.
Run in the combination disc (1) in the Head Up Display using the diagnosis system.
Close the lock (1) in direction of arrow on both sides with special tool 00 9 030 .
Close service cover (1) in direction of arrow.
NOTE:
Make sure the service flap (1) is properly engaged.