62 30 005 Removing and installing/replacing trim for Head Up Display

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2019 MINI Cooper, 2018 MINI Cooper, 2017 MINI Cooper, 2016 MINI Cooper, and 2015 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

00 9 325

When working on trim panel components, make sure that visible surfaces are not scratched or damaged (e.g. by sharp-edged tools).

Removal:

Release cover for head-up display (1) from retaining clips with special tool 00 9 325 .

Feed out cover for head-up display (1) from instrument panel trim (2) and remove.

Fig 1: Removing Cover For Head-Up Display From Retaining Clips Using Special Tool 00 9 325

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

NOTE: Retaining clips an cover for head-up display (1) must not be missing or damaged.

Fig 2: Locating Head-Up Display Cover Retaining Clips

Courtesy of BMW OF NORTH AMERICA, INC.

Join cover for head-up display (1) to instrument panel trim (2) and clip in.

NOTE: Ensure cover for head-up display (1) is correctly fitted and engaged on instrument panel trim (2).

Fig 3: Removing Cover For Head-Up Display From Retaining Clips Using Special Tool 00 9 325

Courtesy of BMW OF NORTH AMERICA, INC.