Removing and installing/replacing battery of telematics control module (Cooper Convertible )

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2021 MINI Cooper, 2020 MINI Cooper, 2019 MINI Cooper, 2018 MINI Cooper, and 2017 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Preliminary work needed:

Remove telematics CONTROL MODULE .

Removal:

Open lid (1) on telematics control module (2) and remove.

Disconnect plug.

Remove rechargeable battery (1) from telematics control module (2).

Installation:

Connect connector.

Insert battery (1) into telematics control module (2) and connect plug.

NOTE: Make sure battery and connector are correctly fitted.

Position and close lid (1) on telematics control module (2).

NOTE: Make sure lid (1) is correctly fitted.

Required follow-up work:

Install telematics CONTROL MODULE .