3332 Trailing Arms And Struts
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2021 MINI Cooper, 2020 MINI Cooper, 2019 MINI Cooper, 2018 MINI Cooper, and 2017 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION (WISHBONE/TRAILING ARM AND STRUTS)
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Upper wishbone to trailing arm | F54/F55/F56/F57/F60 | M12 | Replace nut. | 100 Nm |
| 2AZ Lower wishbone to trailing arm | F54/F55/F56/F57/F60 | M12 | Replace screw and nut. Tighten in NORMAL POSITION . |
100 Nm |
| 3AZ Wishbone to rear axle support | F54/F55/F56/F57/F60 | M12 | Replace nut. Tighten down in normal position. |
100 Nm |
| 4AZ Trailing arm bearing support to trailing arm | F54/F55/F56/F57/F60 | M12 | Replace nut. Tighten in NORMAL POSITION . |
100 Nm |
| 5AZ Trailing arm bearing support to body | F54/F55/F56/F57/F60 | M12 | Replace screw. | 100 Nm |
| 6AZ Cover to trailing arm | F54/F55/F56/F57/F60 | 3 Nm |