Shifting vehicle into normal position (Cooper Convertible)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2021 MINI Cooper, 2020 MINI Cooper, 2019 MINI Cooper, 2018 MINI Cooper, and 2017 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
Preliminary work needed:
- Check compliance with TEST CONDITIONS , repair vehicle if necessary.
- Check vehicle interior and trunk (including spare wheel well) for load status, if applicable, unload car
- Introduce DIN load (refer to TECHNICAL DATA ) into vehicle
- Determine vehicle RIDE HEIGHT .
NOTE:
If the vehicle ride height is not inside the tolerance (refer to TECHNICAL DATA
), the vehicle must be repaired (coil spring/leakage).