61 33 060 Removing and installing/replacing both fanfare horns

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2019 MINI Cooper, 2018 MINI Cooper, 2017 MINI Cooper, 2016 MINI Cooper, and 2015 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove FRONT BUMPER PANEL

Removal:

Unlock and disconnect connector (1) on cable clip.

Fig 1: Cable Clip Connector Location

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1) and feed out holder with fanfares (2) downwards.

Fig 2: Fanfares Screws Location

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Feed in holder with fanfares (2) from below and tighten with screws (1).

Tightening torque: 6 Nm.

Fig 3: Fanfares Screws Location

Courtesy of BMW OF NORTH AMERICA, INC.

Connect connector (1) to cable clip.

Fig 4: Cable Clip Connector Location

Courtesy of BMW OF NORTH AMERICA, INC.