Replace the tank vent valve (Cooper)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2021 MINI Cooper, 2020 MINI Cooper, 2019 MINI Cooper, 2018 MINI Cooper, and 2017 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: Read and comply with NOTES on protection against electrostatic discharge (ESD protection).

Preliminary work needed :

Remove ACOUSTIC COVER .

Removal:

Unlock connector (I) and detach.

Unlock tank vent line (2) and disconnect.

Unlock tank vent line (3) on throttle body and disconnect.

Detach tank vent valve (4) from holder and remove.

Courtesy of BMW OF NORTH AMERICA, INC.

Installation :

Attach connector (1).

Connector (1) must engage audibly.

Plug in tank vent line (2).

Tank vent line (2) must snap audibly into place.

Connect tank vent line (3).

Tank vent line (3) must snap audibly into place.

Fasten tank venting valve (4) to the holder.

Courtesy of BMW OF NORTH AMERICA, INC.

Required follow-up work:

Install ACOUSTIC COVER .