Notes on ESD protection (Electro Static Discharge) (Cooper Convertible)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2021 MINI Cooper, 2020 MINI Cooper, 2019 MINI Cooper, 2018 MINI Cooper, and 2017 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
Special tools required:
- 12 7 060
NOTE:
Electrical components which are particularly sensitive to electrostatic discharge (electronic control units, sensors, etc.) are marked with the ESD warning symbol.
E-Electro
S-Static
D-Discharge
IMPORTANT:
Read and comply without fail with the notes on this subject.
Statically charged persons can discharge themselves when they tap electrical components.
NOTE:
Humans can only detect a discharge starting from a level of approx. 3000 V.
The danger threshold for electrical components already starts from a level of approx. 100 V.
The danger threshold for electrical components already starts from a level of approx. 100 V.
Example:
Mechatronic control unit.
IMPORTANT:
Do not tap pins and multi-pin connectors directly!
Only tap the housings of electrical components.
IMPORTANT:
To avoid damaging or destroying electrical components as a result of electrostatic discharge, it is absolutely essential to observe the following instructions:
- When replacing electrical components, leave the replacement components in their original packaging until immediately before they are to be installed
- If necessary, always return a removed component in its original packaging (always pack the component away immediately)
- Read and comply with user information on using the associated special tool 12 7 060
Personal protective equipment:
Electrically conducting clothing (high wool content, antistatic shoes required).
These can primarily be identified by the logo on the side.