41 61 563 Removing and installing/replacing the left hood hinge (hood removed)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2019 MINI Cooper, 2018 MINI Cooper, 2017 MINI Cooper, 2016 MINI Cooper, and 2015 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT:

These instructions apply only to vehicles without active pedestrian protection.

For vehicles with active pedestrian protection, observe SEPARATE PROCEDURE .

Necessary preliminary work

Remove left COWL PANEL COVER .

Removal

Remove water drain channel (1).

Fig 1: Water Drain Channel

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1) and remove hinge.

Fig 2: Hinge Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Installation

Install hinge and tighten screws (1).

Tightening torque 41 61 2AZ .

Fig 3: Hinge Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Install water drain channel (1).

Fig 4: Water Drain Channel

Courtesy of BMW OF NORTH AMERICA, INC.

Required follow-up work:

ADJUST hinge together with engine compartment lid.