Adjusting Left Tailgate Hinge (Regarding FRU Number 4162014/514) (Cooper, Cooper S, John Cooper Works)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2021 MINI Cooper, 2020 MINI Cooper, 2019 MINI Cooper, 2018 MINI Cooper, and 2017 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
Attention:
Do not damage adjoining body parts.
Remove MOUNTING FOR STORAGE SHELF on both sides of the vehicle.
Slacken nuts (1) on the inside to the point that the tailgate hinge (2) can still be shifted.
Adjust tailgate height and lateral positioning.
Tightening torque 41 62 2AZ/3AZ .
After Installation note:
- Tighten all screws and nuts to specified torque.
- Touch up unpainted surfaces in the appropriate color
- Adjust the striker, if required.