Removing and installing/replacing rear panel on rear seat backrest (Cooper Convertible)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2021 MINI Cooper, 2020 MINI Cooper, 2019 MINI Cooper, 2018 MINI Cooper, and 2017 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Injury hazard!
The seat frame has very sharp edges that can cause injuries from cuts.
Exercise extreme caution and wear hand protection as required when carrying out any repair work in the area of the seat frame.
The seat frame has very sharp edges that can cause injuries from cuts.
Exercise extreme caution and wear hand protection as required when carrying out any repair work in the area of the seat frame.
Preliminary work needed:
Removal:
Lever out backrest cover (1) all around the backrest frame with a suitable tool.
Remove rear panel (1) from backrest.
Installation:
Install rear panel (1) in backrest.
Change the beading of the backrest cover (1) and press it into the backrest frame.
NOTE:
Check that the beading latches in noticeably.
Required reworking: