51 31 045 Removing and installing/replacing trim for left or right A-pillar

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2019 MINI Cooper, 2018 MINI Cooper, 2017 MINI Cooper, 2016 MINI Cooper, and 2015 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary work:

Remove TRIM STRIP FROM SIDE WALL

Removal:

Unclip roof trim strip (1) outwards in front area.

Fig 1: Removing Roof Trim Strip

G11649261

Courtesy of BMW OF NORTH AMERICA, INC.

Release door seal in area of A-pillar.

Release screws (1).

Release cover (2) at clips (3) and remove.

Fig 2: Cover, Clips And Screws

G04797606

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

NOTE: If necessary, release clips (2) from A-pillar (1).

Seal (3) must not be damaged.

Fig 3: A-Pillar, Clips And Seal

G04797607

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Replace faulty grommets (1) on A-pillar (2).

Fig 4: A-Pillar And Grommets

G04797608

Courtesy of BMW OF NORTH AMERICA, INC.

Parts: Replace faulty clips (1 and 2).

Make sure the installation location of clips (1 and 2) is correct.

Red clips with sealing ring
White clip with sealing ring

Clip mount (3) remains free.

Fig 5: A-Pillar Clips With Sealing Rings

G11649265

Courtesy of BMW OF NORTH AMERICA, INC.

Position trim (2) with clips (3) on body and clip in.

Tighten down screws (1).

Fasten door seal in area of A-pillar.

Fig 6: Cover, Clips And Screws

G04797606

Courtesy of BMW OF NORTH AMERICA, INC.

Clip roof trim strip (1) into clamps (2).

Clip roof trim strip (1) into trim (3) in area (A).

Fig 7: Trim, Roof Trim Strip And Clamps

G11649267

Courtesy of BMW OF NORTH AMERICA, INC.