51 24 105 Removing and installing/replacing rear lid lock

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2019 MINI Cooper, 2018 MINI Cooper, 2017 MINI Cooper, 2016 MINI Cooper, and 2015 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary work:

Remove TAILGATE TRIM PANEL

REMOVAL:

Release screws (1).

Unlock associated plug connection and disconnect.

Remove tailgate lock (2).

Fig 1: Tailgate Lock And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

INSTALLATION:

Connect associated plug connections.

Position tailgate lock (2).

Tighten down screws (1).

Tightening torque 51 24 1AZ .

Fig 2: Tailgate Lock And Screws

Courtesy of BMW OF NORTH AMERICA, INC.