REPLACEMENT PART 2 OF 6 - Clean bonding surface

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2019 MINI Cooper, 2018 MINI Cooper, 2017 MINI Cooper, 2016 MINI Cooper, and 2015 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

if required, remove adhesive remains with eraser disk or CLEANING AGENT R2 . Do not damage paint. Stick to air drying time > of 1 minute.
Before a new bond, treat the entire adhesive area with SIKA AKTIVATOR 205 . Stick to air drying time > of 1 minute.

NOTE: Use necessary cotton- or fluff-free paper towel once only.

Do not touch the adhesive area after cleaning.