51 16 204 Removing and installing/replacing rear cup holder

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2019 MINI Cooper, 2018 MINI Cooper, 2017 MINI Cooper, 2016 MINI Cooper, and 2015 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Removal:

Release screws/expanding rivets (1) and feed out the cup holder (2) upwards.

Fig 1: Screws/Expanding Rivets And Cup Holder

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Feed in the cup holder (2) from the top and secure with screws/expanding rivets (1).

Fig 2: Screws/Expanding Rivets And Cup Holder

Courtesy of BMW OF NORTH AMERICA, INC.