41 00... Gap dimensions, front door
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2019 MINI Cooper, 2018 MINI Cooper, 2017 MINI Cooper, 2016 MINI Cooper, and 2015 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The dimensions specified in this document are applicable at an object temperature of 20 °C. The aim of adjustment is to achieve a uniform join.
Symmetry of the gaps between left and right sides of the vehicle has top priority.
For door gaps, the maximum deviation between the front and rear door gaps must be 1.0 mm.
Adjust headlight and tail light with constant all-round gap (visually).
No gap dimension are specified for components which cannot be adjusted.
Dimensions in mm: