51 71 096 Removing and installing/replacing the automatic air flap control

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2019 MINI Cooper, 2018 MINI Cooper, 2017 MINI Cooper, 2016 MINI Cooper, and 2015 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove front BUMPER PANEL
Remove impact absorber from support

Removal:

Unfasten plug connection (1) and disconnect.

Unfasten cable strap (2).

Fig 1: Cable Strap And Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Feed out the air flap control (2) in area (3) and remove the support.

Fig 2: Air Flap Control And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Feed in air flap control (2) and suspend in the support in area (3).

Tighten down screws (1).

Tightening torque 51 71 6AZ .

Fig 3: Air Flap Control And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Connect the connector (1).

Attach cable clip (2).

Fig 4: Cable Strap And Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.