51 11... Installing/replacing license plate (without number plate baseplate)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2019 MINI Cooper, 2018 MINI Cooper, 2017 MINI Cooper, 2016 MINI Cooper, and 2015 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

2 359 574 (template)

Place template 2 359 574 (template) on license plate and center.

Mark and drill/punch drilled holes on license plate.

Deburr bores on the license plate.

Fig 1: Placing Template (2 359 574) On License Plate And Center

Courtesy of BMW OF NORTH AMERICA, INC.

Position template 2 359 574 on bumper cover and align using the marks (1).

Align template horizontally.

Mark drilled holes on bumper cover.

Remove template.

IMPORTANT: Do not pre-drill!

Fig 2: Positioning Template (2 359 574) On Bumper Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Mount license plate to bumper cover using license plate screws and the corresponding protective caps.