51 11 761 Remove and install/replace deformation element for front right bumper

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2019 MINI Cooper, 2018 MINI Cooper, 2017 MINI Cooper, 2016 MINI Cooper, and 2015 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove SUPPORT FOR TOP FRONT BUMPER PANEL
Release FLUID FUEL TANK FOR WINDSCREEN WASHER SYSTEM

Removal:

Remove screws (1 to 4).

Pull out deformation element (5).

Fig 1: Deformation Element And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Insert deformation element (5).

Tighten screws (1 to 4).

Screw	Tightening torque
(1)	51 11 4AZ
(2)	51 11 6AZ
(3)	51 11 4AZ
(4)	51 11 9AZ

Fig 2: Deformation Element And Screws

Courtesy of BMW OF NORTH AMERICA, INC.