51 11 158 Replacing base plate for number/license plate: Notes
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2019 MINI Cooper, 2018 MINI Cooper, 2017 MINI Cooper, 2016 MINI Cooper, and 2015 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
Only use the vehicle-specific number plate baseplate.
The installation of other license plate baseplates is not permissible.
Refer to LICENSE PLATE ATTACHMENT AT FRONT .
The number plate must be precisely mounted on the number plate baseplate.
If a number plate baseplate is not offered for the corresponding national-market version, the number plate must be screwed directly onto the bumper using a drilling template.
Incorrect assembly leads to a malfunction of the sensors of the driver assist systems.
NOTE:
Schematic diagram shown on example of F56 Cooper S national-market version USA.
There may be differences in detail in the case of other versions.
Removal:
Release screws (1).
Remove holder (2) towards front.
Installation:
Position support (2).
Tighten down screws (1).
NOTE:
For initial installation on new bumper panel, pre-drill marks on bumper.