Removing and installing (replacing) reversing camera (Cooper Convertible)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2021 MINI Cooper, 2020 MINI Cooper, 2019 MINI Cooper, 2018 MINI Cooper, and 2017 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: Read and comply with NOTES on protection against electrostatic discharge (ESD protection)!

Preliminary work needed:

Remove the TRUNK LID HANDLE

Removal:

Unscrew the screws (1).

Remove rear view camera (2) from trunk lid handle (3).

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Insert rear view camera (2) correctly into trunk lid handle (3).

Tighten down screws (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Required reworking:

Install the TRUNK LID HANDLE
Carry out reversing camera functional check

Replacement:

Perform the PROGRAMMING/CODING .