Removing and installing/replacing bumper antenna for Comfort Access (Cooper Convertible)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2021 MINI Cooper, 2020 MINI Cooper, 2019 MINI Cooper, 2018 MINI Cooper, and 2017 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Preliminary work needed:

Remove rear BUMPER TRIM .

Removal:

Disconnect connector (1).

Release detent.

Pull bumper antenna (2) out of holder (3).

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Connect the connector (1).

Join bumper antenna (2) in holder (3).

Installation note:

Ensure bumper antenna (2) engages correctly on holder (3).

Courtesy of BMW OF NORTH AMERICA, INC.

Required follow-up work:

Install rear BUMPER PANEL .