Vehicle battery - closed current monitoring (Cooper Convertible)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2021 MINI Cooper, 2020 MINI Cooper, 2019 MINI Cooper, 2018 MINI Cooper, and 2017 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Preliminary work needed:

To access the battery ground lead, perform the necessary preliminary work described in BATTERY EARTH LEAD .

Do not disconnect the battery ground lead!

NOTE: If several 12V batteries are installed in the vehicle:
Closed-circuit current check is possible on the vehicle battery only.

Connect diagnostic system.

Connect the clip-on probe to the battery ground lead of the vehicle battery. The arrow on the clip-on probe must point towards the vehicle battery.

Measure closed-circuit current.