Removing and installing/replacing the tension strut on the left or right (rear) (Cooper Convertible)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2021 MINI Cooper, 2020 MINI Cooper, 2019 MINI Cooper, 2018 MINI Cooper, and 2017 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
Observe SAFETY INSTRUCTIONS
for raising the vehicle
Driving without the trailing link is not permitted!
Driving without the trailing link is not permitted!
Removal :
Release screws (1 - 4).
Remove trailing link (5).
Installation :
Install tension strut (5).
Tighten the screws (1 - 4).
Tightening torque 51 61 5AZ .